eBay Classifieds » All ads » Jobs » 

manufacturing engineer in Austin

(1-24 of 27 ads)

View as:
  1. Sponsored Link 5
  2.  
  1. Electronic Assembly

    A contract Electronic Assembly job in Austin, TX is available courtesy of Adecco Engineering and Technical. You MUST be aUnited Statescitizen, and be able to provide a US Passport or birth certificate upon interview. Two or more years of experience in hands-on assembly is required. Pay rate for this contract will be between $14.00 and $16.00 per hour, depending on level of expertise. Electronic Assembly job responsibilities include:• Assemble and test electronic assemblies according to work ...

  2. Plant Quality Manager de

    Plant Quality Manager Location: Taylor, TX Salary: Up to 80k base with strong bonus and benefits package Paid relocation assistance offered JOB DESCRIPTION GLOBAL, Industry leading, diversified capital equipment manufacturer seeks a PLANT QUALITY MANAGER - Bachelors degree in Electrical Engineering is required. - Must have experience with electronics and printed circuit board troubleshooting. - Strong electronic troubleshooting knowledge required. - Printed circuit board assembly knowledge ...

  3. Production Engineer   – CAD Manufacturing ISO - Toledo, OH

      Full Time Permanent Position for a large US Company. B-605 Production Engineer   – CAD Manufacturing ISO - Toledo, OH Location: Job is in Toledo, OH Domain:  Manufacturing Experience: 3-5 Years   Experienced Production Engineer is required having Analytical skills to interpret and compare existing and new data.     Job Responsibilities: Implement practices to enable production to maintain ISO certification. Perform other duties of similar nature and scope as assigned by supervisor. ...

  4. Mechanical Project Engineer – Six Sigma Pro-E CAD DFMEA - WI

    Full Time Permanent Position for a large US Company. B-485 Mechanical Project Engineer – Six Sigma Pro-E CAD DFMEA - WI Location: Job is in WI Domain:  Engineering   Experienced Mechanical Project Engineer is required having responsibility to determine the technical feasibility of modifications or product redesigns for existing global valve platforms.     Job Responsibilities: Determine the technical feasibility of modifications or product redesigns for existing global valve platforms. ...

  5. Automotive Hardware Engineer – Analog Circuit Simulator – MI

    Full Time Permanent Position for a large US company   BI-204 Automotive Hardware Engineer – Analog Circuit Simulator – MI Location: Job is in Southeast MI Domain: Automotive Experience: 1 Year Experienced Automotive Hardware Engineer is required having Experience in electronics design tools such as: Circuit Simulator, CAD and lab equipment (power supply, logic analyzers, signal generators, scopes). “H1 SPONSORSHIP/TRANSFER IS AVAILABLE.”   Job Responsibilities:   Doing full life cycle ...

  6. CNC Operator – Polishing CNC QA Manufacturing - Addison, TX

    Full Time Permanent Position for a large US Company. B-533 CNC Operator – Polishing CNC QA Manufacturing - Addison, TX Location: Job is in Addison, TX Domain:  Engineering Experience: 3-5 Years   Experienced CNC Operator   is required having Minimum 5 years setup and operation experience on a variety of CNC machine tools and controls (mills and lathes), Swiss style manufacturing preferred.   Job Responsibilities:   Responsible for meeting standard production timeframes established for ...

  7. Programmers/Software Engineers

    GRC is an Austin-based early stage technology company that produces a highly disruptive cooling solution for data center servers featuring total submersion in high performance dielectric fluid. Since bringing the product to market in mid-2010, the company has experienced tremendous growth in manufacturing, sales, production, and personnel and is expanding rapidly to keep up. We are looking for bright, technical people to help change the face of institutional computing. We have a new technology in ...

  8. Engineering Intern

    Currently hiring for full-time engineers and engineering interns -- GRC (www.grcooling.com) is an Austin-based early stage technology company that produces a highly disruptive cooling solution for data center servers featuring total submersion in high performance dielectric fluid. Since bringing the product to market in mid-2010, the company has experienced tremendous growth in manufacturing, sales, production, and personnel and is expanding rapidly to keep up. We are looking for bright, technical ...

  9. Sales Director

    NW Recruiters is seeking a Sales Director. This role will be responsible for developing and managing relationships with carriers and customers, selling our maritime transportation and barging services to business establishments in or connected to the pipeline industry.​ This position covers all sales functions: forecasts, solicits and secures order from potential and existing customers along with providing periodic reports as required.​  Additional responsibilities include tracking shipments, ...

  10. Security Technicians Needed for long term work!

    This company has a very family oriented culture and is interested in your long term success. Whether its on the job training you are looking for or the opportunity to get licensed and certified in the various manufacturers they represent, this company strives to take care if its people. These are Temp to Hire and Direct Hire positions in all areas of Fire and Security system work including: alarm installation, service, and inspections. Apply now and let us introduce you to this premier company! ...

  11. Project Manager HH

    (Senior) Project Manager – Explosion Safety Company is a leading Notified Body working with Manufacturers in the field of explosion safety seeking to get their products to different markets quickly. Company provides expert knowledge for the key markets in the EU, USA, Canada, Japan, Taiwan, Korea, China and Australia. Our project managers have backgrounds in the explosion safety device industry, mostly in R&D and/or manufacturing. Many of them hold advanced degrees, e.g., Ph.D. or MSc. They ...

  12. Senior Project Manager – Explosion Safety

    (Senior) Project Manager – Explosion Safety Company is a leading Notified Body working with Manufacturers in the field of explosion safety seeking to get their products to different markets quickly. Company provides expert knowledge for the key markets in the EU, USA, Canada, Japan, Taiwan, Korea, China and Australia. Our project managers have backgrounds in the explosion safety device industry, mostly in R&D and/or manufacturing. Many of them hold advanced degrees, e.g., Ph.D. or MSc. They ...

  13. Senior Design Verification Engineer (EK) A

    Senior Design Verification Engineer (EK) A Semiconductors Engineering - Electrical Full-time United States - Texas - Austin ID - 879491 The Compensation Benefits - Full Relocation Assistance Available - Yes Bonus Eligible - Yes Interview Travel Reimbursed - Yes Detailed Job Description Responsible for functional verification of mixed-signal audio CODECs. Detailed responsibilities include but are not limited to: verification planning, testbench development, failure analysis and resolution, ...

  14. Maintenance Technician II

    Job Title: Maintenance Technician II Reports to: Director, Facility Engineering Employment Type: Full-Time FLSA Status: Exempt     Summary: The Maintenance Technician II, under the supervision of the Director, Facility Engineering, will be responsible for the various aspects of maintenance and support for equipment, including, but not limited to, ultra-low temperature freezers, bio-safety cabinets and hoods, steam sterilizers, ultra-pure water systems, including reverse osmosis filtration, ...

  15. Calibration Technician III

      Job Title:  Calibration Technician III Reports to:  Director Facility Engineering Employment Type:  Full-Time FLSA Status:  Exempt /Hourly   Summary:  The Calibration Technician III initiates, implements, and schedules the facility Calibration program with an emphasis on planning and scheduling calibration of the facilities instruments, to ensure the accuracy and reproducibility of the operations of the laboratories and mobile clean rooms..   Essential Functions: This position will ...

  16. Experienced Automotive Technicians Needed (Howdy Honda)

    Howdy Honda 5519 E. Ben White Blvd. Austin, TX 78741 Experienced Automotive Technicians Needed Howdy Honda has a growing service department with a very high rate of customer retention. Our average vehicle mileage for line technicians ranges between 110,000 miles and 120,000 miles. Warranty only makes up 8% of our business. We are dedicated to training as we currently have 8 master technicians and we are one of 87 Gold Certified Honda service departments in the country. Our line technicians only ...

  17. Quality Control/Documentation Specialist - Spicewood, TX

    INTERESTED? No need to call, simply go to our website and submit your resume directly on there only, http://www.frontlinesourcegroup.com/ Frontline Source Group - temporary staffing and direct hire firm – is looking for a Quality Control/Documentation Specialist for our Spicewood, TX client on a contract to possible hire basis. Job Qualifications and Duties: Associate Degree or equivalent experience in electronics technology and/or 1 to 5 years prior experience in a manufacturing organization ...

  18. ERP Developer (Plex)

    Our customer in Seguin, TX is currently looking for an ERP Developer to join their team on a long-term contract basis. The main function of a Analyst/Developer is to provide application and/or team leadership in the development of detailed system specifications for major business support and/or development, integration, and implementation projects. Job Responsibilities: Design, code, test, and debug programs of varying levels of complexity. Acts as team leader for development and support groups ...

  19. Maintenance Technician III

    Summary:  The Maintenance Technician III, under the supervision of the Director, Facility Engineering, will be responsible for various aspects of maintenance and support for Kalon owned equipment, including, but not limited to, ultra-low temperature freezers, steam sterilizers, ultra-pure water systems, including reverse osmosis filtration, electro-deionization (EDI) and pure water distillation as well as distribution; Clean room air filtration schemes and pressure cascades, etc.   The Maintenance ...

  20. Sr. Engineer- Mechanical Drivetrain Design

      Would you like to move to the live music capital of the world?   Would you enjoy living in the beautiful green hill country?   Would you appreciate a warmer climate during long winter seasons?   Most of all, would you like to lead the design efforts for improving performance and flexibility of transmissions?   If so, we have the perfect opportunity for you!   Fallbrook Technologies, located in Northwest Austin, is currently seeking a Sr. Engineer to join our team of innovative engineers. ...

  21. Control Panel Design Manager - South Austin, TX

    INTERESTED? No need to call, simply go to our website and submit your resume directly on there only, http://www.frontlinesourcegroup.com/ Frontline Source Group - temporary staffing and direct hire firm – is looking for a Control Panel Design Manager for our South Austin, TX client on a direct hire basis. Essential Functions: Oversee Control Panel Designers and CAD Drafters under the direction of the Corporate Manufacturing Director. Oversee design activities, including creation, review and ...

  22. We are recruiting for the hottest fire and security installation compa

    This company has a very family oriented culture and is interested in your long term success. Whether its on the job training you are looking for or the opportunity to get licensed and certified in the various manufacturers they represent, this company strives to take care if its people. These are Temp to Hire and Direct Hire positions in all areas of Fire and Security system work including: alarm installation, service, and inspections. Apply now and let us introduce you to this premier company! ...

  23. Engineering Prototype Machinist

     Fallbrook Technologies Inc. (Fallbrook) is dedicated to revolutionizing the mechanical world with our breakthrough technology.  NuVinci technology offers companies the flexibility to design and produce next-generation products better tailored to their unique business, market and competitive requirements. Our first products and markets are based on our NuVinci continuously variable planetary (CVP) technology, which is applicable to machines that use a transmissions, including bicycles, light electric ...

  24. Print Shop General Manager -Bryan, TX

    To learn more about this position, including how to apply, click on this link, or paste it into your browser: http://www.printworkers.com/Default.cfm?fuseaction=search.3&ID=41442 Job ID:41442 General Manager for immediate hire to manage a print shop in Bryan, Texas. In this role, you will analyze, evaluate and lead projects and initiatives aimed at improving operational efficiency and driving quality, safety and productivity. The GM will be responsible for layout and implementing an aggressive ...